Model - 130232
Type - 0036 -01
Code - 75022107
I believe that the Briggs part # for this is 260958. It is ball-bearing supported and was used in many of the Briggs Model 130232 horizontal shaft engines. The PTO end is 3/4", straight, and has a slotted keyway. The protruding PTO end out past the sidecover must be at least 2 1/4" in length. I just took into inventory a real nice engine (see above), however, it has the "shorty" PTO end that is only 1 1/2" long- no good for our needs. Looking for a decent used crank with the crankpin in good shape and not worn past reject size. Please PM or email me directly at michael.moore@charter.net if you have one or a lead on one to sell.
Thank for any help,
Michael