My dad has a mid 90's John Deere 1032 snow blower. It is very clean and I am going through it. I replaced fuel and primer lines, fresh gas and it starts right up and seems to run well. I did find a small box with a new switch in it Part number AM102553. It attaches to the carb cover above choke lever. The old one must have fallen off. Anyway the switch has two tabs for wires to connect.
As I look around I only see one wire on the machine coming off that could hook up to it?? This switch is not an electric start. It appears to be more of a safety piece, turn on to run, off to not run. Looking for help to determine where the other wire would come from and which wire would attach to which connector. Maybe a wire diagram of this piece?
Thanks for your help.