Bent Crank Honda HRX217

[lefty]

Honda HRX217
MAGA-2344261

Engine:
HRX2174VKA
GJAAA-2978839 MX1

I got this in with a badly bent blade. The owner hit a pipe sticking up out of the ground. I took the blade off and the adapter is junk as well. In addition, the crank is bent. What are my options here, if any? Thank you.

[KE4AVB]

Considering how cheap the 13311-Z8D-900 crankshaft I would just replace the crankshaft once you there is no further damage. Heck it is under $31 plus shipping.

https://www.toolpartspro.com/honda-parts/honda-gcv190la-type-s3a-parts/honda-13311-z8d-900-crankshaft?gclid=EAIaIQobChMI75z7hoL09wIVwW5vBB2_ugosEAQYAyABEgL6nvD_BwE

One note that crankshaft got to be made out pretty metal to be only $31.

[lefty]

Thanks. I appreciate it.

I probably have at least a partially sheared flywheel key as well I'm guessing. Not sure if it's an appropriate question but what would be the hours for such a repair?

Thank you.

[RoyM]

You should be able to do it in a couple of hours with normal shop tools. Other than removing and reinstalling the bbc it is no more difficult than any other self propelled mower.