lefty wrote:Static adjustment:
With the throttle cable disconnected, I loosened the 3/8 nut, held the throttle on the carb wide open and turned the governor stem clockwise. Then tightened the 3/8 nut back up again.
When I push up on the governor arm, it forces the throttle on the carb closed.
When I ran this prior with the governor spring disconnected (the spring that connects the throttle cable "u" lever to the governor arm), the governor was unable to close the throttle on the carb via the linkage from the arm to the carb. It didn't even look like it was trying to move. It just kind of flopped around.
Return to Technical Discussion Forum
Users browsing this forum: No registered users and 26 guests