• Advertisement

Honda HHH25

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Honda HHH25

Postby billsmowers » Sat Feb 20, 2016 7:02 am

Hi guys just had a honda HHH25 hedge trimmer come in covered in oil started it up and smoking like mad when warm on tickover but clears when revved cleaned air filter, checked compression 100psi checked breather was clear which it is the customer will not spend a lot of money on this so don't want to spend to much time on it i was thinking rings at first but not as shore now what do you guys think?
billsmowers
 
Posts: 26
Joined: Sat Nov 16, 2013 11:17 am

Advertisement

Re: Honda HHH25

Postby bgsengine » Sat Feb 20, 2016 8:38 am

overfilled with oil? stored upside down? (or sideways) sounds like your smoke is coming from oil residue sitting in the muffler - it clears when revved because the exhaust gasses are passing through so much faster and no time for mixing with the oil.
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)
bgsengine
Briggs MST
Briggs MST
 
Posts: 3308
Joined: Sun Nov 03, 2013 10:07 pm
Location: Northcentral P.A.

Re: Honda HHH25

Postby billsmowers » Sat Feb 20, 2016 9:27 am

bgsengine wrote:overfilled with oil? stored upside down? (or sideways) sounds like your smoke is coming from oil residue sitting in the muffler - it clears when revved because the exhaust gasses are passing through so much faster and no time for mixing with the oil.
I ran it for over a hour still smoking checked oil level and did a oil change on it a about 2 months ago it is as if it is sucking oil in from somewhere.
billsmowers
 
Posts: 26
Joined: Sat Nov 16, 2013 11:17 am

Re: Honda HHH25

Postby KE4AVB » Sat Feb 20, 2016 9:53 am

GX25 engine. Could be the intake valve stem seal leaking.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6032
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: Honda HHH25

Postby billsmowers » Sat Feb 20, 2016 11:19 am

KE4AVB wrote:GX25 engine. Could be the intake valve stem seal leaking.
Thank you for the info but dos not show up on parts ipl here in uk ?
billsmowers
 
Posts: 26
Joined: Sat Nov 16, 2013 11:17 am

Re: Honda HHH25

Postby KE4AVB » Sat Feb 20, 2016 1:00 pm

Bill, Can post a link to the IPL that your looking at on your end?

Most of the parts should be same between the HHH 25S and the HHH 25D when it comes to GX25 engine. If so then valve stem seal would be 12209-Z0H-003.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6032
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand


Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 13 guests