John Deere LX176 second time this part has broken. Looks like belt is rubbing against it then it snaps.
All the spindles seem in good shape. Makes a huge rattle sound after failing, put tiny bit of pressure on brake and it stops
-
- Advertisement
part keeps failing
4 posts
• Page 1 of 1
part keeps failing
by man00 » Mon Apr 25, 2016 9:10 am
John Deere LX176 second time this part has broken. Looks like belt is rubbing against it then it snaps.
All the spindles seem in good shape. Makes a huge rattle sound after failing, put tiny bit of pressure on brake and it stops
- man00
- Posts: 32
- Joined: Fri May 02, 2014 9:14 am
Advertisement
Re: part keeps failing
by KE4AVB » Mon Apr 25, 2016 9:28 am
A picture of the actual failed part would help and not that Ebay picture. Need to see where the wear is and where it is breaking but I suspect the v-idler belt retainer might hanging on it. Haven't had in the shop with broken ones here.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
-
KE4AVB - Forum Pro
- Posts: 6037
- Joined: Mon Nov 04, 2013 11:23 am
- Location: TorLand
Re: part keeps failing
by man00 » Mon Apr 25, 2016 10:37 am
KE4AVB wrote:A picture of the actual failed part would help and not that Ebay picture. Need to see where the wear is and where it is breaking but I suspect the v-idler belt retainer might hanging on it. Haven't had in the shop with broken ones here.
Thanks, I'll look see if I can find it
- man00
- Posts: 32
- Joined: Fri May 02, 2014 9:14 am
Re: part keeps failing
by DennyIN » Tue Apr 26, 2016 5:11 am
Are you using a John Deere brand belt, if not that could be the cause. The JD brand of belt has a slightly different angle on the V portion.
- DennyIN
- Posts: 36
- Joined: Tue Nov 05, 2013 1:44 pm
- Location: East Central Indiana, Bentonville
4 posts
• Page 1 of 1
Return to Technical Discussion Forum
Who is online
Users browsing this forum: Google Adsense [Bot], Merkava_4 and 10 guests