Valve settings and other specs

[dennis]

I am working on a Briggs and Stratton Series 800 engine, model 12T102, type 0060 F8, Serial 13 0814 88 95282. Does anyone know the valve clearances on this engine, and any other general specs? It is on a wood splitter. Thanks.

[KE4AVB]

Model Series 12T1
Engine Series 800
Displacement 205
Oil Capacity 20 oz (0.6 l)
Valve Configuration OHV
Flywheel Torque 65 lb/ft (88.0 Nm)
Governor Arm Torque 45 lb/in (5.0 Nm)
Carb Mount 85 lb/in (9.5 Nm)
Plug Gap 0.03 in (0.75 mm)
Intake Valve .004-.006 in (.10-.15 mm)
Exhaust Valve .009-.011 in (.23-.28 mm)
Idle Speed 1750
Air Gap .010-.014 in (.25-.36 mm)
Flywheel Puller Part 19069
Flywheel Holder Part 19433
Connecting Rod Torque 100 lb/in (11.5 Nm)
Sump Torque 100 lb/in (11.5 Nm)
Head Torque 220 lb/in (25.0 Nm)