by KE4AVB » Tue Apr 10, 2018 12:17 pm
Could even be a bad HV lead. I have seen them do this with other coils. A break in the wire will cause this as the gap is too great with the plug install but yet just enough to fire otherwise on a spark tester; unless, it set at max recommend gap such as the adjustable Briggs tester.
I would try replacing the HV lead as most are replaceable. I replaced several leads last year on Kawasaki, Briggs, and various 2 cycles. This why I have crimp on terminals in both straight and right angle plus 7mm plug wire in stock. I have already made up one HV lead this year. I learned how to do this as I got throwing good coils just because of the mice damage.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.