I have a Tecumseh that does not have the typical label or etching in the shroud just a tag like older models. The tag has SBH4273A Ser: 6351f. What do I have?
Thanks
Pat
Not all that unusual but not exactly common either but have seen short blocks from the factory (briggs, tecumseh and kohler) that could be anywhere from STD to .030 over38racing wrote:is/was it common for shortblocks to be .020 oversize?
KE4AVB wrote:The 7273A is the short block for the LH195SA (HSSK-40). Use the 3 - 11 HP 4 cycle L head service manual.
Last version of the 7273A is the 754273C.
Return to Technical Discussion Forum
Users browsing this forum: No registered users and 3 guests