• Advertisement

Gravely ZT2352 Zero-turn engine problems

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Gravely ZT2352 Zero-turn engine problems

Postby samcarpen » Fri Jun 14, 2019 1:28 am

Md 915050, serial 010115 with a Kohler spec no. PS-75579 serial no. 3501904851. Starts running poorly after about 5 minutes of cutting grass though smooths out when PTO is disengaged. Once PTO is reengaged, again runs poorly. To me, it acts like a coil is failing. Can't find a engine IPL. Research points that a Kohler 2458445-S coil is correct for this engine. Trying to verify if this is true. Would also like to be able to locate a IPL.

Thanks, Sam
samcarpen
 
Posts: 25
Joined: Sun Feb 07, 2016 10:00 pm

Advertisement

Re: Gravely ZT2352 Zero-turn engine problems

Postby 38racing » Fri Jun 14, 2019 7:50 am

Could it be a wiring issue/component in a kill circuit. I once dealt with a mower cutting out after it heated up with a pinched safety circuit wire.
38racing
Forum Pro
 
Posts: 2365
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada

Re: Gravely ZT2352 Zero-turn engine problems

Postby KE4AVB » Fri Jun 14, 2019 9:46 am

No problem finding the CV23-75579 engine IPL here and yes the PN you have for the coil is correct.

And a failing plug or plug wire terminal can cause the same thing. Also check the PTO clutch current draw as be causing the voltager dropping too much and fuel solenoid is partially closing.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6200
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand


Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 2 guests

cron