depends on which side of the engine the flywheel is on. could be either way (or flywheel could be on upside down or backwards.. or at least seem that way... ) But for the most part I have seen them all running essentially in a CW direction relative to the cylinder porting (generally exhaust on the right, carb on the left, the side you're looking at , engine likely rotates CW.. but if you look at it from the other side, it's CCW)38racing wrote:Always ccw looking at flywheel? Replacing flywheel on a ryobi and looking at pull starter I noticed it was ccw. I'm used to the 4 cycle being cw.
bobodu wrote:Blame Canada....
Return to Technical Discussion Forum
Users browsing this forum: Google [Bot] and 30 guests