• Advertisement

Gcv160 excessive choke time

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Re: Gcv160 excessive choke time

Postby 38racing » Tue May 02, 2023 8:08 am

Here's interesting observation. I paid 13 for 80 ml of ultra gray. 80 ml of right stuff was 17. So i just checked and 300 ml of right stuff is 45 so making 80 ml down to 12. Kicker is 300 ml of ultra gray was also 45. So good saving if buying big right stuff but none going big on the ultra. All prices were regular at Canadian tire.
38racing
Forum Pro
 
Posts: 2312
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada

Re: Gcv160 excessive choke time

Postby KE4AVB » Tue May 02, 2023 9:40 am

Just wondering which we talk about the one minute or the 90 minute version as I see both advertised.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6052
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: Gcv160 excessive choke time

Postby Arkie » Tue May 02, 2023 2:31 pm

If you can store the un-used portions of gasket makers stuff (and super glue) in a Refrigerator it will usually store for a long long time after it's been opened or even before it's been opened.
Arkie
Forum Pro
 
Posts: 1047
Joined: Sun Nov 10, 2013 5:58 pm

Re: Gcv160 excessive choke time

Postby hanz63 » Tue May 02, 2023 11:33 pm

I use 29208 1 minute Right Stuff.
The fridge could be a good tip. Thanks for that Arkie!
hanz63
Forum Pro
 
Posts: 470
Joined: Thu May 26, 2016 3:07 am

Re: Gcv160 excessive choke time

Postby KE4AVB » Wed May 03, 2023 7:41 am

Okay then we have these options. Still not gasoline resistant. This is why I use MotoSeal for some applications, especially 2 cycle applications.

Image
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6052
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: Gcv160 excessive choke time

Postby hanz63 » Wed May 03, 2023 10:37 pm

I don't know where I would use this in direct contact w/ fuel. I do use this between the gasket and the warped intake on the Intek twins. Seems like most of them are. I finally had to buy a new tube on Perm #2. Rarely use it but have been squeezing the last of it on those lowly 2 Briggs sump bolts time and time again. Down to my last cam for the year....
hanz63
Forum Pro
 
Posts: 470
Joined: Thu May 26, 2016 3:07 am

Previous

Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 2 guests