Kohler CH25 ignition??

[BLES]

Kohler CH25S- 68507

When I try to look up ignition coils/module that part of page is blank... no numbers. How do I find current part numbers?

BLES

[StarTech]

Okay Bles called Kohler since this not listed on any of the IPLs for the spec.

You will need to determined if it is 1 or 2 terminal versions you need.

1 Terminal PN 25 584 15-S
2 Terminal PN 24 584 36-S

[BLES]

Thanks Starfire.

I believe those are the latest numbers for the individual ignition coils. This engine also has the spark advance module that was used for a while. If memory serves me correct, there is a required wiring harness change, too, that gets rid of it.? I forget how I tracked down all these numbers last time. Is there any other way to find parts if a person doesn't have a contact with Kohler? Wish I'd made some notes last time I saw one of these. I only remember enough to be dangerous!

Also, is it possible it's 2 or 3 terminal instead of 1 or 2? I seem to recall something about that.

[KE4AVB]

If your system has the 24 584 36-S see the the following service bulletin.
https://drive.google.com/open?id=0B-g4TpKUJnh7dWhUYlhoU3RteXM

[BLES]

I'm thinking I should re-word my original post. The spark advance module (or whatever you call the third piece in the system) has failed. I don't believe it's used any more but I'm not sure how to switch to the new system. I think I remember that there is a new harness and a new coil for each cylinder and the SAM is discarded or at least unhooked.? Does this make any more sense? Thanks for the replies.
BLES

[KE4AVB]

Maybe your thinking of the DSAI to MDI conversion kit. I don't know if that kit will work on the CH25 coil mounting otherwise. Here is a link to the PB-259_DSAI_MDI_IGNITION.pdf.

PB-259_DSAI_MDI_IGNITION.pdf