128T05-5268-B1
Mounted on a craftsman mower. When u let go of the safety bail the engine still runs. I found the tiny kill switch. Even when I ground the black wire to the block manually it will not kill the engine. What gives?
Thanks.
Good thought - I *have* had wires that broke within the insulation - visually looked fine, but on testing, no continuityWalt 2002 wrote:Not so fast, use a jumper wire and jump directly from the coil kill wire terminal to the engine block. In 65 years of "tinkering" with small engines, I have never had that results from a bad coil.
Walt Conner
Walt 2002 wrote:Not so fast, use a jumper wire and jump directly from the coil kill wire terminal to the engine block. In 65 years of "tinkering" with small engines, I have never had that results from a bad coil.
Walt Conner
Fulltilt wrote:Yep, I've seen several that have failed in that way. Most "modules" /coils have a diode in the kill circuit. Open diode = no kill.
Return to Technical Discussion Forum
Users browsing this forum: Google [Bot] and 46 guests