• Advertisement

Repairing a Honda Recoil Starter

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Re: Repairing a Honda Recoil Starter

Postby NO0C » Wed May 10, 2017 8:30 pm

I couldn't agree more. Good outfit! First place I look when I need Honda parts.
NO0C
Forum Pro
 
Posts: 246
Joined: Tue Nov 19, 2013 5:11 pm
Location: Kearney, NE

Re: Repairing a Honda Recoil Starter

Postby 38racing » Wed May 10, 2017 10:06 pm

NO0C wrote:Well, the spring curl broke on mine again yesterday. I was able to put a new hook in it and got going again.

Decided that mowing 60+X/season X 10 seasons X 8 pulls/mow, it's probably been pulled north of 5000 times. Time for something different.

Went down to the local OPE shop and they wanted nearly $40 for an aftermarket Oregon 31-066. No thank you.

My neighbor has a 1 year old Honda mower with a GCV190 engine with a starter that will work on my CGV160A. 28400-Z8B-901ZB (red, long rope).

Found one at boats.net for $7.15 ($15.16 FOB 68845-4802). I just won't be able to mount the trim cover. I don't care.

Image

I would assume that the rope could be extended up the handle simply by removing the pull T , splicing the extra piece of rope at the housing and running it up the handle and placing the T up there.
38racing
Forum Pro
 
Posts: 2360
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada

Re: Repairing a Honda Recoil Starter

Postby NO0C » Wed May 10, 2017 10:11 pm

This is the LONG rope version.

No modification required. Plug and play/pull.
NO0C
Forum Pro
 
Posts: 246
Joined: Tue Nov 19, 2013 5:11 pm
Location: Kearney, NE

Re: Repairing a Honda Recoil Starter

Postby NO0C » Mon May 15, 2017 4:58 pm

My new recoil starter arrived today. (28400-Z0B-901ZB)

It is indeed the long rope version and it came fully retracted and works great. No need to adjust anything to do with rope length. No stop bead on the rope either as the pulley must hold a lot more rope than the original design.

I did remove the TEE handle and replaced it with the OE handle. Nests in it's retracted saddle better and far more ergonomic.

Image

38racing wrote:I would assume that the rope could be extended up the handle simply by removing the pull T , splicing the extra piece of rope at the housing and running it up the handle and placing the T up there.
NO0C
Forum Pro
 
Posts: 246
Joined: Tue Nov 19, 2013 5:11 pm
Location: Kearney, NE

Re: Repairing a Honda Recoil Starter

Postby 38racing » Tue Jul 25, 2017 9:51 pm

Now I find this interesting.
I looked up starter on ipl for gcv160a0 s3db
starter is the one going under the cover and is 28400-z8b-v41
now looking up for gcv160a stl1 it's 28400-z0l-v72
the ipl pictures are the same but that's for reference only I guess but I wonder what the difference is between the assemblies. Unfortunately I haven't found actual pictures on parts suppliers sites but the v41 is $10 on two sites and on both sites the v72 is $33-$45 range.
38racing
Forum Pro
 
Posts: 2360
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada

Re: Repairing a Honda Recoil Starter

Postby NO0C » Wed Jul 26, 2017 7:33 pm

Long v short rope?

Pull handle v no handle?

Color?
NO0C
Forum Pro
 
Posts: 246
Joined: Tue Nov 19, 2013 5:11 pm
Location: Kearney, NE

Previous

Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 37 guests