lefty wrote:Thanks guys. I just found it on the carburetor bracket. It was covered in crud. 9P702-0005-F1. Mar 6 12
I don't see this in the single cylinder OHV manual. Would it be the 97700 & 99700 series?
NO service manual on the EX and EXi series yet just APSI and TSB's
Specs for your engine:
Model Series 09P7
Power Lbs/Ft of Torque 5.5
Engine Series 550
Displacement 140
Oil Capacity 16 oz (0.5 l)
Valve Configuration OHV
Flywheel Torque 60 lb/ft (81.5 Nm)
Governor Arm Torque 30 lb/in (3.5 Nm)
Plug Gap 0.02 in (0.50 mm)
Intake Valve .004-.008 in (.10-.20 mm)
Exhaust Valve .004-.008 in (.10-.20 mm)
Idle Speed 1750
Air Gap .006-.014 in (.15-.36 mm)
Flywheel Puller Part 19619
Flywheel Holder Part 19619
Connecting Rod Torque 100 lb/in (11.5 Nm)
Sump Torque 85 lb/in (9.5 Nm)
Head Torque 140 lb/in (16.0 Nm)
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)