Hello
I have Yamaha Generator
Model EF6600DE
Serial 7RH-221876
The problem, neither copy covers the Fuel cut-off solenoid circuit. but it covers everything
else in carb test section.
I have a unit that's not getting power to the solenoid. The Solenoid did work by adding power from the battery, momentarily thru
its 2 wires. The ignition switch & wires to solenoid in circuit have continuity. The wire schematic on the ignition switch
"pin out" shows this circuit being in OFF SIDE (PIN) on the switch. So is the fuel cut-off solenoid powered by the charging coil from engine
V.S dc feed from battery? The unit is equipt with electric start. I have a functioning Starting circuit, Spark from Mag, and off for Mag.
It will run on a fuel prime momentarily.
I have a print copy of part number LIT-19616-00-73 and supplement LIT-19616-CM-98.
I was told by Yamaha that I need LIT-19616-CM-66
Well even though they said I needed the previous manuals I purchased, how is this much different.
Both local dealers were little help. Is it possible the printed versions I have are missing the pages?
I don't want to fork out any more dough for duplicate info that I already have.
Any help would be appreciated.