Briggs Valve Clearance

[dennis]

I went on the Briggs and Stratton site, downloaded owner's manual, but could not find the valve clearances, which I assume are set at 1/4" after top dead center. The engine I am working on is Model 12F702, Type 1814-E1, Code 97082158. I could not find the spark plug gap in that worthless manual too. Any help would be appreciated.

[KE4AVB]

Will the following help?

Technical Specifications

Model Series 12F7
Engine Series 625
Displacement 190
Oil Capacity 20 oz (0.6 l)
Valve Configuration L-head
Flywheel Torque 55 lb/ft (74.5 Nm)
Governor Arm Torque 40 lb/in (4.5 Nm)
Carb Mount 40 lb/in (4.5 Nm)
Plug Gap 0.03 in (0.75 mm)
Intake Valve .005-.007 in (.13-.18 mm)
Exhaust Valve .007-.009 in (.18-.23 mm)
Idle Speed 1750
Air Gap .006-.010 in (.15-.25 mm)
Flywheel Puller Part 19069
Flywheel Holder Part 19433
Connecting Rod Torque 100 lb/in (11.5 Nm)
Sump Torque 85 lb/in (9.5 Nm)
Head Torque 140 lb/in (16.0 Nm)

[dennis]

It sure does, KE4AVB.....thank you.