by bgsengine » Sun Aug 11, 2019 6:25 pm
Carburetor - > 697735 -> 692799 -> 692668 -> intake port should be the assembly order..
Note that 692668 OEM gasket has a peel-off liner to expose an adhesive to allow it to stick (glue) to the surface for alignment purposes while 697735 does not .. but other than the adhesive and secondary alignment tab (which can be broken off anyhow) there's little difference between the 2 gaskets so it doesn't particularly matter which one goes where as long as they all line up properly and sandwich the 692799 (gasket/insulator/spacer, whichever term you prefer, but technically it is an insulator, though some IPLs call it a gasket , others may call it spacer... ) between them
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)