by bgsengine » Thu Dec 05, 2019 2:32 pm
I don't see why it wouldn't be able to be run outside of the machine, all you need really is jumpers to hook up battery ground to engine block, jumper the other cable to the starter to start it up, and supply another 12v jumper wire to the carburetor solenoid, leaving the ignition ground wire disconnected. If there is a carburetor solenoid working properly, once you remove the 12v power supply from it it'd shut the engine down, or othewise just a jumper wire from the ignition ground wire to touch to engine block to shut down.
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)