Got this Honda generator, customer stated it wouldn't start. The first pic is what I sucked out of the tank... Carb in bad shape wanted to order another whole unit...but, the little throttle motor is specific and doesn't have the same pin configuration as what I can see to order. The Model number is quite obliterated...I've tried to look at the Honda EU2000i numbers but I cannot seem to find the right carb assembly. I do not think the throttle motor works anymore seeing as it does not adjust idle when current is plugged in. The pin configuration is a flat four wire on both sides of cable, carburetor and motherboard side. The only carb setup I've been able to find at all is a four wire square plug to the generator motherboard. Anyone have any suggestions? Dynomite might be useful?