by bgsengine » Tue Jul 28, 2020 7:08 am
well if the machine was built after 2012, then they just ran afoul of the EPA, technically - it'd also be emissions control - fuel tank vent- recovers vapors that otherwise would be vented to atmosphere just like the evap system on a car.. But if you are not worrying about running afoul of EPA (seriously, I don't think they'd waste their time trying to enforce on an individual) then you'll want to be 100% sure it is not "just" a rollover valve - if it is a fuel tank vent as I suspect, you will suffer vapor lock issues with your mower eventually, until you fix it .. alternatively just plug off at the carb and let the valve vent to open air (although you might wrap a foam filter or something around it to keep dirt out of your gas) but if you are anal about having your equipment "just right" , then you'd replace the hose (and it would probably be expensive if it has to be the EPA Non-Permeable type)
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)