Hello; Thanks for reading my post.
I am replacing the drive cable on a Yard Machine MTD Front Wheel Drive Walk Behind Model 12A-446U729.
From the Numbers on the old Cable (746-1146) it would seem to be a simple deal; order the cable and install.
However, the old cable has the spring at the transmission end....the Z connector at the Handle. The illustrations for the replacement 746-1146 cable shows it the other way around.
I don't understand what is going on.
See a couple of attached pictures and thanks for the help!
Chuck
https://imgur.com/XcMijTu
https://imgur.com/lyrVimV
https://imgur.com/QFkMPBt