jerkputter123 wrote:Thanks for all the help. From the numbers I posted would this the cam he needs? Briggs & Stratton 793880 Camshaft
on this 17.5 briggs. He is going to remove the engine and tear it down. I passed the info I got here to him on what to look for. I will post back results. THANKS
jerkputter123 wrote:Thanks for all the help. From the numbers I posted would this the cam he needs? Briggs & Stratton 793880 Camshaft
on this 17.5 briggs. He is going to remove the engine and tear it down. I passed the info I got here to him on what to look for. I will post back results. THANKS
jerkputter123 wrote:He got the parts and installed the new camshaft. I ended helping I was able to finally get the cover on after installing cam. Now when I spin it over by hand it sounds like it hits something after turning it two rounds. I made a mark and its at the same place. Almost like its hitting a detent or something. It will pass over what ever is that its hitting but I don't won't to install this engine until I find out that that noise is. I only got two bolts in the cover so no problem to pull the cover back off. Any idea what would make this noise ?
Return to Technical Discussion Forum
Users browsing this forum: Google [Bot] and 17 guests