• Advertisement

Ryobi RBC430SBD

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Re: Ryobi RBC430SBD

Postby Stoner » Tue Jun 07, 2022 9:12 am

I had in mind something else: an increase in the scope when mowing.
Stoner
 
Posts: 22
Joined: Mon Nov 09, 2020 11:45 pm

Re: Ryobi RBC430SBD

Postby Stoner » Thu Jun 09, 2022 10:05 am

Good afternoon, after the trimmer works, the felt gets wet (starts dripping oil from the felt). How can this be prevented?
Stoner
 
Posts: 22
Joined: Mon Nov 09, 2020 11:45 pm

Re: Ryobi RBC430SBD

Postby grunt » Mon Jun 13, 2022 10:22 am

Skywatcher wrote:Well said Suki, well said :lol:

Stoner,

KE4 gave you the link to the owner's manual, read it. There's an old saying that goes; The Lord helps them who helps themselves.

You evidently have Internet connection, otherwise you wouldn't be here. There is quite a lot of information about these units on Google and quite a few Youtube videos. Do some research for yourself, then if you really get stuck, check back here and we'll see what we can do for you.

Sky


"If all else fails, read the instructions".
grunt
 
Posts: 39
Joined: Tue Nov 05, 2013 12:44 pm
Location: Chicago, IL

Re: Ryobi RBC430SBD

Postby Stoner » Mon Jun 13, 2022 10:49 am

The manual doesn't say anything about that.
Stoner
 
Posts: 22
Joined: Mon Nov 09, 2020 11:45 pm

Re: Ryobi RBC430SBD

Postby bgsengine » Mon Jun 13, 2022 3:45 pm

Fairly normal for those china built machines. Most likely you are slightly overfull of oil and the breather is venting the excess oil, breather vents into the air box, so oil mist will condense and soak the filter.
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)
bgsengine
Briggs MST
Briggs MST
 
Posts: 3361
Joined: Sun Nov 03, 2013 10:07 pm
Location: Northcentral P.A.

Previous

Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 52 guests