kE4AVB & bsengine
I have not reviewed your reply info yet. (on another project)
Yes the wiring plugs look same. I can handle the electrical change over ok. I have to be more careful than usual because this rig has the electronic dash readouts and just need to do a double check before connecting so as to reduce smoke. Smoke on a digital dash is not a good thing.
Mostly need a IPL to look at part numbers then a picture so as to compare the possibility of having to make or do some bend adjustments to few parts/pieces.
AND the existing Cub Frame frame already has bunch of other holes for the engine mounting and most likely a different anti-rotation bracket will be needed for the electric clutch
because the electric clutches are not
same size physically.
The bracket is a combo anti-rotation and pto belt keeper long with several bends. (and the IPL part number for the existing mower's bracket
is not even correct) I also need to investigate the weird muffle mounting for these engines.
I have both engines mufflers and exhaust systems, but the Kohler exhaust came off a Craftsman frame. May have to do some exhaust re-rigging and throttle/choke cable changes.
Murphy seems to be around helping me when doing engine swap outs seeing the unexpected all at once during the finals.
Thanks for the info.