KE4AVB wrote:According to the IPL the engine has an aluminum ring gear. IF so then it is the 16 tooth plastic gear that is used. The 14 tooth will only eat up the ring gear. Where when a 16 tooth plastic gear is used on a steel ring gear the gear is eaten up.
Also pay attention to the IPL as there are three different Starter Bendix listed.
But looking at the IPL I do see a 24 tooth gear use the starter that has 4-3/8 Housing. That complete Bendix is PN 495878. Which uses the 692353 gear. Just note that gear will fit all three 692024 starter clutch/drives.
Return to Technical Discussion Forum
Users browsing this forum: No registered users and 25 guests